Devices 101

In most cases a device in your Revel Digital account represents a digital signage player responsible for displaying your digital signage content. A device could be a PC, Android tablet, TV, or even a Bluetooth beacon.

Devices are registered to your account with a registration code presented by the player app when run for the first time.

If the player hardware you are using did not come pre-installed with the Revel Player app you will need to install this first. Windows hardware utilizes a different app than Android hardware.

Windows Hardware

• Install the Revel Digital Player app
  Open the Windows Store app on the player PC and search for “Revel Digital” or use this link. Once installed, start the Revel Digital app to get your registration code.

Android Hardware

• Install the Revel Digital Player app
  Open the Google Play app on your Android device, or browse to the Google Play Store. Then search for “RevelDigital” or use this link. Once installed, start the Revel Digital app to get your registration code.

 BrightSign Hardware

• Please refer to our BrightSign setup guide

Amazon Fire TV Hardware

• Install the Revel Digital Player app
  Open the Amazon app store on the Fire TV device, then search for "Revel Digital". Once installed, start the Revel Digital app to get your registration code.

Device Registration

Registering a device makes it available in your Revel Digital account for management. Each player in your network will need to registered. It is possible the device was pre-registered before being shipped in which case no code will be presented and will start straight into scheduled content.

Registration Code

The first time the player app is started it will present a registration code similar to the following:

With this code you can now register the device to your account. Click the Register New Device button.

Enter the registration code along with other device specific information including location if applicable then click Save.

Congratulations

Your device should now be registered. Successful registration will display the Congratulation screen on your display. If the code does not work please contact support and we will step you through generating a new code.

The device will now show up in your Devices page and is now ready to be scheduled content.